Depot work...

I've been away from the railroad stuff for awhile and hit the mid model blahs on the M-RAP, so I dug this kit out.

The is the Fallberg Station, designed by John Olsen for his HOn3 layout way back. The details of the kit can be found here... I picked it up on Ebay a few years ago and found it while looking for something else. It's a neat little kit that will keep you busy for a few nights.

I've assembled the walls and crane Hydrocal castings make up the walls and dock, which is 1 piece. The walls were assembled with Tacky Glue. I then painted them a base of grey, then a wash of Model Master Burnt Umber and Pollyscale Dirt. The crane will be painted first with a Boxcar Red then Ammo of Mig chipping solution will be over sprayed, so when I goto paint the yellow, I can chip it off and get a good rust base.

The crane is an interesting detail. Took a minute to get figure out where everything goes.

Next up, paint the crane, door and window frames and do somemore weathering to the building. Instead of the printed roofing included with the kit, I'm going to use Plastruct corrugated metal sheet stryene for the roof and weather it.

More to come!

Forward!

Gotten a little done on the MRAP. Most of my time has been work and other projects.. .

MRAP progress...

Among other things, I did get some work done today on my MRAP. Chassis is done, now for paint..

A little this, a little that....

So many things, so little time..

Getting hooked on scale models again. Mostly modern US military (1/35) and big rigs (1/25).

 
Also trying some different weathering products on the trains as well as the other stuff..

The military modelers really have some great stuff to use.. The three here are...

Vallejo, great washes and acrylic paints...
http://www.acrylicosvallejo.com/en_US

AK Interactive, part of Vallejo. Weathering sets for alot of different modeling types. Make sure you look around...
http://ak-interactive.com/v2/

And Ammo by MIG. A new line with alot of good sets and supplies as well.
http://www.migjimenez.com/en/

There is a US distrubutor, but they're stock is behind what is available from over in Europe.

Also, make sure you look at The Weathering Magazine. Lot's of good info in here...
http://www.migjimenez.com/en/36-english-version

Have fun!

Change change change...

Man, almost an entire year since I posted anything. But life does get in the way. The job I took last year has kept me busy. Getting into unplugged woodworking has also been taking up time, along with the garden. Then, my first grandson showed up Dec 1st.

So, it's time to get back into modeling. I moved my bench into a closet set up to make my office bigger. After measuring the work space I use, I figured out that when I'm building I use a 24" x 30" space. Everything else is storage. So, I've made a 25" by 36" bench to build on. All the parts, glues and whatnot go above on shelves. The paint booth is next to the bench. Here's a picture of it after getting everything done this weekend..

Right now modeling is going to be split between railroads and plastic models (modern US Mil hardware, big rigs and EMS) I have plans to start a shelf layout this spring as well. I'm leaning more towards an N scale industrial layout, but I haven't given up on narrow gauge just yet.

More to come when I get further along..

New diesels..

So I'm working on some power for the FdT. On the deck now is a pair of end cab switchers, built onto a pair of N scale MP-15 chassis with DCC. Good running engines, so these should work well for yard and local power. Here's a shot of the chassis.

I'm working on the cabs and hoods now.

I also went out to the Des Moines GTE this last weekend. For a guy who's been to a bunch of west coast shows, the Midwest was a big change. No junk vendors, lots of good stuff and some hard to find items. Got some more 20 foot containers and found a fellow from Green Bay that sells sheet stryene in different sizes for good prices. Like almost half of Evergreen.

JMD Plastics is the company name. John the owner is a GB&W modeler and will ship sheet stryene all over. I got a big pile for $16, enough to build just about all the steel boxcars I want for the layout. If you want 1 or 2 sheets, it will be pricey, but if you want 1' x 8' sheets or a pile of 1' x 2' .020" sheet, he has really good prices. He also does black stryene as well.

Several vendors also had Blackstone equipment out there, just to tease with. I really wish they would stop. If I wind up in a different house with a proper basement, it will be hard to not convert everything to HOn3..

Okay, back to work on the diesels..

Painted and weathered Railbus..

She's almost ready for service....

I used Vallejo washes and some homebrew washes for the finish. I may add a little more, but she's got a decent used look to her. Now I need to add a trailer to her.